HTB-SZ/SK type acid-resistant ceramic water ring vacuum pump

product center

1. Product Introduction
HTB--Water-ring Acid-resistant Ceramic Vacuum Pump, the pump body is made of engineering ceramics and a variety of non-metallic materials optimized for the parts in contact with the liquid ring and gas, suitable for drawing corrosive gases. The medium that forms the working water ring in the pump can be clear water without suspended particles, or various organic or inorganic acids (except hydrofluoric acid and hot concentrated alkali) without suspended particles or crystallization and do not react with the gas to be drawn.
2.Performance Summary Two types of structures are used: single-acting and double-acting radial suction and exhaust. It has a large air volume, high efficiency, and stable operation. The mechanical seal is used for the shaft seal, which is tight and reliable. Vacuum degree: -86～-93kPa; Discharge volume: 3～30m3/min3. Application The water-ring acid-resistant ceramic vacuum pump is an ideal product for vacuum dehydration, vacuum drying, vacuum filtration, and air compression in the paper, pesticide, fertilizer, non-ferrous metallurgy, and chemical industries. Since the water-ring pump is isothermal compression, it is suitable for drawing flammable and explosive gases. It can be widely used in the petroleum, chemical, and other industries to draw various corrosive gases, and can also be used for compression in low-pressure situations.

4, Model Description5, Detailed Parameters

5、 Detailed parameters
The performance parameters listed in the table are the performance under the following standard conditions:
1. Atmospheric pressure; 101.33KPa；
2. Inhale air with a temperature of 20 ℃ and a relative humidity of 70%;
3. Outlet water temperature: 15 ℃

Structural pattern	Model	Air volume (m³/min)	Vacuum (kPa)	Consumption (l/min)	Motor power (Kw)	Speed (r/min)	Motor model
Axial Single Action	SZ-70	0	-89.4	30	7.5	1450	Y132M-4
		1	-80
		2	-60
		3	-30
	SZ-125	0	-93	70	18.5	980	Y200L1-6
		6.5	-80
		9	-70
		7.5	-30
Axial Double Action	SK-80	0	-89	35	15	1450	Y160L-4
		1	-80
		4	-60
		6	0
	SK-150	0	-89	80	45	980	Y280S-6
		4.5	-80
		15	-60
		20	-30
	SK-150-M	0	-89	75	30	730	Y250M-8
		1	-80
		5	-60
		15	0
	SK-200	0	-86	90	55	740	Y315S-8
		5	-80
		20	-60
		30	0

6, Structural forms

7. Pump exterior and installation dimensions
HTB-SZ-70Water-ring vacuum pump exterior and installation diagram

HTB-SZ-70Water-ring vacuum pump installation dimension table

Model/Size	L1	L2	L3	L4	L5	L6	A	B	C	H	E	F	h	θ	n孔φd	n孔φd	D	D1	D2	D3
SZ-70	186	373	373	188	405	465	515	780	80	495	321	175	25	45°	6孔φ23	(4-M16)	70	150	185	115

HTB-SZ-125Water-ring vacuum pump exterior and installation dimensions

HTB-SK type water ring vacuum pump exterior and installation diagram