HTB-ZK-U Corrosion-resistant and wear-resistant engineering plastic mortar pump

product center

1, Product Introduction
HTB-ZK-U corrosion-resistant and wear-resistant engineering plastic mortar pump, which belongs to single-stage single-suction cantilever centrifugal pump. The flow parts are generally made of steel lined ultra-high molecular weight polyethylene (UHMWPE). This material is the new generation of pump用 corrosion-resistant and wear-resistant engineering plastics in the international community at present. Its outstanding advantages are that it has excellent wear resistance among all plastics, impact resistance (especially low-temperature impact resistance), creep resistance (resistance to environmental stress cracking), and very good corrosion resistance. The application range is very wide. This pump is compact in structure, closely sealed, easy to install and maintain, and reliable in use.
2, Performance Summary
Seal: pressure reduction combined with fluororubber oil seal ring or centrifugal seal with auxiliary impeller, mechanical seal. Applicable medium: concentrated sulfuric acid below 75%, nitric acid below 50%, various concentrations of hydrochloric acid, liquid alkali, both clear liquid and slurry.
Main technical parameters: operating temperature -20℃～90℃ (for special requirements, using other materials, it can be increased to 120℃), inlet diameter 40mm～150mm, flow rate 5～240m3/h, head within 60m.
3, Application Range
● Various corrosive矿 slurries in the metallurgical industry; dilute acid, mother liquor, wastewater, seawater, fluorosilic acid containing silicagel, phosphoric acid slurry in the phosphate fertilizer industry; non-ferrous metal metallurgy industry: suitable for various acid solutions, corrosive矿 slurries, slurry (filter press), electrolyte, wastewater, etc. in the wet method metallurgy of lead, zinc, gold, silver, copper, manganese, cobalt, rare earth, etc.
● Chemical industry and other enterprises: various sulfuric acid, hydrochloric acid, alkaline, oil clear liquid or slurry post. Titanium white, iron red powder production, various dyes, pigments production, non-metallic mineral processing and other industries.
● Chlor-alkali industry: hydrochloric acid, liquid alkali, electrolyte, etc.
● Water treatment industry: pure water, high-purity water, wastewater.
● Steel enterprises: sulfuric acid, hydrochloric acid post in the pickling system, wastewater with impurities.
●Wet desulfurization circulating pump: can be used simultaneously for alkaline, acidic, and corrosive positions.
4, Model description

Impeller material code

Material	Ultra-high molecular weight polyethylene			Modified rubber and plastic	Fluoride alloy	Polyvinylidene flouride	Polyether chloride	Stainless steel	Silicon carbide
Material	Corrosion resistance and wear resistance	Heat and wear resistant	Corrosion resistance	Modified rubber and plastic	Fluoride alloy	Polyvinylidene flouride	Polyether chloride	Stainless steel	Silicon carbide
Code name	S	S1	S3	S2	S4	S5	S6	G	C
Note	U-shaped pump not marked

Pump body material code

Material	Ultra-high molecular weight polyethylene			Modified rubber and plastic	Fluoride alloy	Polyvinylidene flouride	Polyether chloride	Stainless steel	Silicon carbide
Material	Corrosion resistance and wear resistance	Heat and wear resistant	Corrosion resistance	Modified rubber and plastic	Fluoride alloy	Polyvinylidene flouride	Polyether chloride	Stainless steel	Silicon carbide
Code name	U	U1	U3	U 2	U 4	U 5	U 6	G	C
Note

Sealed form

Sealed form	Mechanical seal	Power seal	Hard to hard seal	Double-end face seal	Modular mechanical seal
Code name	J	D	Y2	Y3	Y4
Note	Matching clear liquid pump

5, Structural type

六、Detailed parameters

Model \ Parameter	impeller specifications	Rated speed 2900 rpm				Rated speed 1450 rpm				Vaporization Margin (m)	Weight (kg)
Model \ Parameter	impeller specifications	Flow rate Q (m3/h)	Discharge head H (m)	Motor power N medium specific gravity (Kw)	Efficiency η %	Flow rate Q （m3/h）	Discharge H （m）	Motor power N medium specific gravity (Kw)	Efficiency η %	Vaporization Margin (m)	Weight (kg)
HTB- ZK4.0/20	Standard	5	24	2.2	33			1.5		4.0	60
		10	20		37	5	5
		15	16		35
	A	5	12	1.5	26
	B	5	15	1.5	26
	C	8	10	1.5	27
HTB- ZK5.0/30	Standard	10	33	5.5	40	5	8.2	1.5		4.0	110
		20	30		43	10	7.5
		30	27		41	15	6.7
	A	30	22	5.5	36
	B	20	20	4.0	35
	B	25	18	5.5	36
HTB- ZK6.5/50	Standard	25	51.5	15	36	12.5	12.8	3		5.0	220
		30	50		41	15	12.5
		40	45		39	20	11.2
	A	15	50	11	35
	B	20	45	11	35
	C	25	40	11	35
HTB- ZK8.0/30	Standard	30	32.8	11	43	15	8.2	2.2		5.0	188
		40	30		48	20	7.5
		50	29		46	25	7.2
	A	30	27	7.5	42
		40	25	7.5	44
		50	23	11	45
HTB- ZK10.0/35	Standard	50	37.5	18.5	50	25	9.4	3		5.0	220
		60	35		52	30	8.8
		70	31		49	35	7.8
	A	50	32	15	50
	A	60	29	15	50
	B	100	32	22	52
HTB- ZK10.0/50	Standard	80	52	37	50	40	13	5.5		5.5	250
		100	50			50	12.5
		120	47			60	11.7
	A	80	42	30	47	40	10.5	4
		100	40		49	50	10
		120	38		48	60	9.5
HTB- ZK15.0/25	Standard					150	28	37	58	6.0	410
						220	25		65
						240	22		60
	A					150	35	45	49
						200	32		52
						240	28		50
HTB- ZK15.0/40	Standard					120	43	37	51	6.0	520
						150	40	45	58
						200	37	45	56
	A					100	45	37	50
	B					130	35	30	52
	C					160	45	45	56
HTB- ZK15.0/25-D	Standard					100	27	30	53	6.0	360
						120	25		57
						140	24		58
	A					85	22	15	46
						100	20		50
						120	18		52

七、Pump external and mounting dimensions Mounting external dimensions table

Installation Outline Dimensional Table

Model	Power (kW)	With Motor	Installation dimensions
			D₁	D₂	d₁	d₂	B₁	B₂	n₁-s₁	n₂-s₂	n₃- s₃	E	h₁	h₂	L₀	L₁	L₂	L₃	L₄	L
HTB-ZK4.0/20	2.2	Y90L-2	40	25	100	85	260	260	4-M10	4-M10	4-φ18	81	160	110	110	97	336	97	308	791
HTB-ZK5.0/30	5.5	Y132S₁-2	50	40	125	110	320	320	4-M12	4-M12	4-φ20	98	212	150	110	160	400	160	370	1042
HTB-ZK6.5/50	15	Y160M₂-2	65	50	170	155	330	420	4-φ18	4-φ18	4-φ20	126	310	215	145	184	616	170	480